Request for an application not listed



Chemteq Area Monitors are direct-read colorimetric indicators that indicate the presence of trace toxic chemicals in air. They are reliable and cost effect means for protection from exposure to toxic chemicals in the work place. The monitors are selective and highly sensitive to target chemicals with first noticeable color changes appear at or below OSHA permissible exposure limits (PEL).

The monitors are easy to use; simply attach the monitor to suitable location position on stack, duct, vent or flue where representative sample can be obtained. These monitors are also conveniently used in trucks and container used to transport chemicals. They operate at temperatures 4oC to 40oC (39oF to 104oF) and humidities 5% RH to 90%RH. The area monitors are 0.11 inch thick, 1.5 inch diameter.

The ChemWipes are surface wipes for the detection and quantification of toxic chemicals on surfaces. The chemWipes are available for;

 • Aromatic diisocyanates e.g. toluene 2,4-diisocyanate (2,4-TDI), toluene 2,6-diisocyanate (2,6-TDI) and 4,4'- methylene diphenyl diisocyanate (MDI) .

 • Mercury and mercury II compounds .

 

The ChemWipe is easy to use:

  1. Wipe surface

  2. Check for color change

  3. Determine amount of contamination using color comparator

The ChemWipes are selective and sensitive. The unique design of the ChemWipe provides uniform color change formation enabling user to quantify chemical contamination using the color comparator.

The ChemWipe is 0.33 inch thick, 1.25 inch diameter. It has shelf life of 12 months at room temperature.


Chemteq
600 West 24th Street, Suite B
Norfolk, Virginia 23517
USA
Phone: (757) 622-2223
Email: sales@chemteq.net
Surface Contamination Testing, Area Monitor aromatic diisocyanates, Filter Saturation Indicators. Surface Contamination Testing, Area Monitor aromatic diisocyanates, Filter Saturation Indicators. Surface Contamination Testing, Area Monitor aromatic diisocyanates, Filter Saturation Indicators.